R/C Tech Forums - View Single Post - Houstons Engine Service H.E.S.
Thread: Houstons Engine Service H.E.S.
View Single Post
Old 05-10-2010 | 08:12 PM
  #3096  
Cory Kerber's Avatar
Cory Kerber
Tech Fanatic
iTrader: (10)
 
Joined: May 2009
Posts: 769
From: Fresno, CA
Default
Originally Posted by houston
factory on the n21r carb is 5 turns out on low speed ( pull slide barrel out , run screw in until it just stops , then backout to desired setting ) , high speed needle 4.25 turns out , idle 1.25 out from just closed .

race settings are usually around 3.75 turns on low speed , 3.5 turns out on high speed , 1turn out from just closed on idle screw .

any Q's just let me know
Monty mine is 3 out on the lsn, and 1.5 out on the idle. Hopefully that's not too lean.
Last edited by Cory Kerber; 05-10-2010 at 08:43 PM.
Cory Kerber is offline  
Reply