Psycho-I was chatting with Cameron and he suggested Pit Shimizu D27R belted slicks with Yokomo ZR-037F firm inserts. He also suggested using 80wt oil, but he didn't recall if i should use 2 hole or 1 hole pistons.
I am going to try this setup that I picked up from xtremerc for smooth track setup for the TA03.
Rear
80wt oil
Blue Springs
1 hole pistons
2 degrees of camber
4mm ride height
battery to the rear
Red sway bars
16 tooth pulley
Front
80wt oil
Blue Springs
1 hole pistons
2 degrees of camber
yellow sway bars
16 tooth pulley
Stock Hub Carrier