R/C Tech Forums - View Single Post - Another steering servo question
Thread: Another steering servo question
View Single Post
Old 05-08-2010 | 07:34 PM
  #4  
desmobob's Avatar
desmobob
Tech Initiate
 
Joined: Mar 2010
Posts: 47
Default
Originally Posted by Duster_360
The 5645 would be an improvement in that it would center better. I don't know what the specs are on the stock strg servo, the ads I've read lists them as hi torque, metal geared servos. If the 5645 is stronger, I would replace it, if its less torque, then I wouldn't.

The advertised specs of the OEM Skyion servos are 144 oz/in and .22 seconds transit time at what I would assume is 6V. I'm a little skeptical about the torque figure as I'm able to manually move the servo arm fairly easily with the 6V system turned on.

Looks like the HS-5645MG would be an improvement. I'll mount one up tomorrow and give it a whirl (it's supposed to be too cold and windy for R/C flying, so I'll do some R/C driving!).

Thanks for the advice guys,
desmobob
desmobob is offline  
Reply