Originally posted by Mike D
gijoe64 - I saw the pictures of your car... nice. I'm not sure which class or surface you run in. For stock racing on ozite my setup for the rugrat is as follows: irs front end (10 degree reactive angle, all caster shims foward, .020 springs, 1.5 degrees camber, trinity red stuff lube on king pins), silva spring steel t-plate with 3 pod screws, silva center shock with 35 wt and blue associated spring, tweak screws and no springs on damper tubes, 10,000 silicone in damper tubes, batteries in rear position, 3.5mm ride height, Jaco Grey rears and Jaco purple fronts. I run the servo flat on the chassis with mid-height ball studs on the steering blocks and kimbrough mid-size servo saver. I noticed your servo is angled - some people like it mounted that way, but I liked the handling better with the servo flat.
Mike D, Thanks for the info.
This will put me on the right track.
By the way I am running carpet.