R/C Tech Forums - View Single Post - Mugen MBX6
Thread: Mugen MBX6
View Single Post
Old 05-07-2010, 06:51 PM
  #7199  
Dos Andos
Tech Master
iTrader: (32)
 
Dos Andos's Avatar
 
Join Date: Jan 2010
Location: Adelaide
Posts: 1,569
Trader Rating: 32 (100%+)
Default

Originally Posted by Davidka
I've found the car to run very poorly at full droop. Traction rolls easily and doesn't enter turns well because of too much weight transfer. That's with 350r/400f shocks on the soft springs as kits came with after the 1st update.
I found that also... that was untill I had a chat with a little french guy at the national titles in Adelaide.
Please try running the shocks on the lower holes on the front and rear shock towers, 500 front and 450 rear if it is a mild day anything above 30 degrees in temperature I would go 550 and 500, FULL droop, 15000 15000 10000, front upper arms all the way forward, maximum anti squat, when chassis is flat on the ground -5 front camber and -6 rear, 2 toe out front and -2.5 rear, standard sway bar front and 3.2 rear, ride height start from 27 front 29 rear.
This setup makes the car very easy to drive especially on slippery tracks.
It would be great if other people around the world could try this next meet so as to get some feed back...
Dos Andos is offline