Originally Posted by
BeeRye86
I bought some MaxAmps 2200s for my mini revo and ordered the wrong balance plugs. I got the Hyperion plugs by mistake but have some Align style that I need. My basic issue is which wire goes in which slot on the plug. I have some other packs with align plugs, they have a white, black, and red wire. The MaxAmps packs have two blacks and a red. The Hyperion plugs are much wider and have a black wire on one far end of the plug and the other black one right next to the red wire on the other side. How should I go about putting these in the Align plug?
I think the pin spacing is the same between the two though, so if you carefully rewire the hyperion plug (one lead at a time, testing with a multimeter) in the same order as the align, you should be able to plug it right in. You might have to trim the plug clip to make it fit, and this will lose the keying that makes it impossible to plug in backward.
Getting the right balance adapter really makes the most sense:
http://www.maxamps.com/products.php?cat=176