need some help guys,i started breaking-in my motor yesterday, pre-heated the engine with a hair blower,the engine starts but keeps on flaming out,it will idle for about 10 seconds then flames out,so i pulled the engine and sealed the carb base,backplate,pinchbolt,checked for any airleaks on my fuel tank,tubing..then put it back again on my car,but still doing the same thing,there is no problem with my needle settings,btw im using an os carb on my engine,then the last thing i check is my turbo plug(NOVAROSSI PLUG),when i put it in on my igniter it does give a bright orange color.Im still figuring out what could be the cause.