R/C Tech Forums - View Single Post - Xceed 1/10 200mm Chevy
View Single Post
Old 05-04-2010, 12:44 PM
  #45  
dj apolaro
Tech Elite
 
Join Date: May 2005
Location: Miami, Fl.
Posts: 2,433
Default

Hi guys,

I had a chance to test 4 bodies this past weekend. Altis, Chevy, RS4 and ISF. Getting ready for the Worlds I want to use what ever is best (by this I mean what give the fastest laps). I had heard of the new Protoform, but do not have access to one, so I did not include it in my test. Be sure I will though!

Out of all four that I tested the Chevy gave the fastest laps. this test was on an unsealed high bite track. The ISF was second closest then the Altis and the RS4 was last. This is as far as lap times. The Chevy rolled in the rear the most and all three other were pretty flat. The ISF felt and looked the best, but again the time were not the fastest. I think a lot has to do with how the body is mounted and racers are going to have to just play around with this.

I hope to get a Protoform and test it soon enough.

DJ Apolaro
dj apolaro is offline