Originally Posted by
Casino Kid
Hello
Just bought 2 MMP , they should be at my door step next week.
The question is are the MMP competative with the likes of the Tekin?.
I am asuming from what i have read that the MMP is better suited for short to medium tracks.
And what motor for 17.5 and 10.5 would run the best.
X12 seem to have plenty of torque (so i should be able to gear up a bit more)
SP v2 has good RPM (so i should be able to gear down to suit the track)
Tekin well its the middle of the road ????
This will be the track i will be running on at the end of the month
http://www.rctech.net/forum/attachme...img_5920-d.jpg
Steven
I think the Speed Passion would probably be a good bet. I use one myself and since changing from a Novak that has a 12.3mm rotor as stock, to a SP Version 1 with a 12.5mm stock rotor in it, the brakes are much better and this esc generally seems to work better with motor timing left stock and geared down with high esc timing. (This is my experience anyway)
The SP V2 has the same specs and rotor as the V1, so if I were you, i'd get that or a Trinity Duo as that is virtually the same but with adjustable timing.
I run a close timing start and end to geeunit1014 - 3,000 - 15700 (or around that ballpark). As that seems to smoothen the thing out. Anything with a much smaller gap seems to surge the timing too much initially.