Hi,

am confused with the beta supercharger software.. there are 2 documents introducing the software.. one is a brief description of the settings 12 to 15, while the other is more detailed giving starting points for differnt motor winds..

My confusion is with setting #15

Document 1 states:

Supercharger Punch: This setting controls timing advance at RPMs below the Start RPM setting. Lower settings decrease motor temps, and higher settings increase punch and motor temps.

While document 2 states:

This setting artificially retards the AMTS setting at high load/low RPM states to help the motor stay cool, and gain back punch from being “over dvanced”. The higher the setting #, the less advance is being shown to the motor before the Supercharger engages, and therefore the cooler the motor will run, and likely to have more punch as well.

so which is which? Will a higher setting # increase or decrease motor temps, and what is the effect on punch in the in-field?

Also... do u guys think i will be able to run a v3 9.5T with this software?