R/C Tech Forums - View Single Post - 8T 2.0
Thread: 8T 2.0
View Single Post
Old 04-25-2010 | 02:07 PM
  #6705  
techpro's Avatar
techpro
Tech Regular
iTrader: (9)
 
Joined: Apr 2009
Posts: 292
Default
Originally Posted by JAMMINKRAZY
I tun lower inside on the tower and A on the hub. I've been running it like that for a long time. You have to shorten the camber link a bit or run a camber link from the front of the truck. I also run a 2.0mm sway bar in the rear. This setup came from Casey Peck and Billy Fischer.
I ordered a set of turnbuckles from the rear of the 1.0 truggy they are 100mm,hopefully they wont be to short compared to the front turnbuckles of the 2.0 at 107mm,thanks for the help.
techpro is offline  
Reply