Originally Posted by Chris Adams

I couldn't tell how wide you have the front.

Anyways, the setup sheet says its low traction so you have to get the car to roll and transfer weight. You have (if im not mistaken... dont have the knowledge of hpi springs) pretty stiff springs on the car as well as use of the stiffest setting of the stock sway bar in the rear. Move the sway bar mount inside or to the middle mounting position and try 2.8 and 2.6 springs especially when using the optional arms with the outer mounting hole. Lastly, the setup sheet shows you have one hole open all the way around the car. Thats way too stiff of a setup for any track.

Remember, every setup is about appropriate amount of weight transfer.