R/C Tech Forums - View Single Post - AXE ROSSI Engine thread.....
View Single Post
Old 04-12-2010 | 09:02 PM
  #103  
thenova70ss's Avatar
thenova70ss
R/C Tech Elite Member
iTrader: (53)
 
Joined: Jun 2008
Posts: 1,635
From: Arkansas
Default

Guys just gone to give you some Info i found out this weekend if you have ever Bottomed out you LSN and HSN and after that you motor would not hold a Tune and Temps would go way up no mater how much you Fattened up the LSN and HSN you have messed up your carb you should NEVER Bottom out your LSN are you HSN if you need to reset you carb set you LSN to FLUSH and you HSN to FLUSH and go form there NEVER BOTTOM you LSN are HSN it will MESS up your Carb.

I seen this on a NEW Axe Rossi Mamba X1 this week a friend got from Me and Casey NEW he Green Slimed the LSN and the HSN and Bottomed them out and reset them to Flush but it had MESSED up the LSN and HSN it ruined his Carb and now he needs a NEW Carb.

We took a Carb from Casey's Axe Rossi Mamba X1 the LSN and HSN have never been Bottomed out he just started tuning from Flush and put it on Russes motor and it Ran GREAT so we found out you NEVER NEED TO BOTTOM OUT YOUR NEEDLES ARE YOU MIGHT RUIN YOUR CARB.
thenova70ss is offline