Originally Posted by
nick64merc
I have a Axe Rossi X1 with the Hot Mod done to it. This is a little bit older engine. It is not the EVO motor. I switched out the head on it to a turbo head and I was running P3 plugs, but they wouldn't seal in the head which was causing a flame out issue. I am Running a JP-3 Pipe, and was Just wondering if that Pipe is a good pipe for that motor and if I switch to the Rossi plugs will the head stop leaking. I was also wondering if I could just buy the crank that has the expoxy in it the Evo crank. I have not seen the the cranks for sale. My crank doesnt have the Epoxy in it. Any help you could provide would be appreicated. I really want to run this motor. I had issues with the original carb so I swapped it out to a OS Ninja carb and that seemed to work really well. If you dont know which motor this it looks just like the Evo X1, but the Head is a lighter Color.
Nick64merc Yes i know the motor you are talking about i have one and have run it and love it with the Turbo head on it. You will need a new head Button the threads are not the same for Axe Rossi and O.S. P3 plug if you get a new Button you can run the Axe Rossi plug and it will not Leak. I can sale you the Head Button and the Plugs if you like and will make you a GREAT deal on them i all so think Axe Rossi make a Kit to make your Motor the newer Mamba X1 EVO i can look this up for you and let you know what it would cost if you would like me to.
And Yes on the JP3 pipe i have run that pipe with that motor and it works GREAT the best pipe to run with the motor is the JP2 but the JP3 is all so good. With the JP2 on the Axe Rossi Mamba X1 on a STRR truggy my friend and Axe Rossi Sponsored Driver Casey Sipes was getting 12 min run times on a BIG out door track and was running the truck Hard with TONS of power.