Originally Posted by
strong
When I hold one wheel and the spur and turn the other wheel it will slip but not really easy......I must use some force.....Not a lot but some......Problem is when I give full throttle when starting I here a noise like the tires or spinning or something is slipping......My belts are loose but I know they are not slipping cause I put marks on them so I can see if they move........Just want to make sure every thing is ok so I dont have to start buying part and waiting two weeks for them to come.
Just check everything in the drive line, from the pinion through to the tires. Make sure the pinion is on tight and meshed well with the spur. I'm assuming you've checked both diffs, then check the drive shafts, even the wheel hexes can slip (where the pin goes as well as the outer hex against the rim) and finally make sure the tires are glued to the rims properly. If all that looks ok, then you're probably spinning the tires
It actually doesn't take that much force to spin your wheels, particularly on a lower grip surface.