Originally Posted by
mark barford
Can anyone post a picture or a link to the programmer you need to do this? Do you need the old card and a programmer or can you get away with just one?
Also links to where I can buy one!
Many thanks
WARNING!!!
This is a BETA software and any self upgrades that are put onto your Hobbywing are entirely at your own risk you may blow up Speedo's and Motors etc etc etc.
Now for the additional Supercharger settings....... Here you will need to use an old style LED program card to do this no idea why, butone assumes that the new Program card will have the new options built into it.
Plug it in and wait for the two numbers to appear.
Setting 12 is for the Turbo boost level, controlling the overall power being delivered by the Turbo function. Keeping this setting lower will reduce both top speed and heat
Setting 13 allows for the adjustment to the RPM level at which the Turbo Function ‘kicks in’. The Turbo will not start up until this motor speed has been achieved.
Setting 14 allows you to adjust the amount of time ‘full throttle’ must be held BEFORE the turbo function engages this can be fine tuned along with setting 13 to allow best use of the turbo function of the Hobbywing ESC.
Setting 15 on your Hobbywing LED programmer is for Turbo function Punch: This controls the timing advance at RPMs below the level that has been set in Setting 13. The higher you set this the punchier the motor will be but conversely the hotter the motor will get.
Having run this up on the bench the REVS are off the scale the Turbo kicks-in in an absolutely vicious fashion and it managed to rip my Sorex pre glued tires off the rims lol.
Happy HobbyWinging guys but Please Please remember you do these things AT YOUR OWN Risk, this is non standard BETA software not meant for our versions of these fine Speedos.
Enjoy!
Cherry xx
All PM's answered up to now.