R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 03-22-2010, 10:27 PM
  #3434  
JdogL
Tech Addict
iTrader: (7)
 
Join Date: Oct 2007
Posts: 667
Trader Rating: 7 (100%+)
Default

Originally Posted by @tomino
Hi I'm new into the forum; I'm Italian and also I'm testing the beta firmware with not exceptional results. I'm tested the firmware 230 and 231 with novak ballistic 10,5. I have used FDR 6,7 and 8,4 with same result; much velocity on the straight, but little punch on the corner exit, with motor temp between 65 and 80 degrees C.

Forgive me, but who tells us that the FW 230 and 231 have actually the highest performers with motors 10,5 ?? in the programming not thetware list seems there are a dozen firmware and all with supercharger functions.
No one can tell us which ones are tested (because I imagine that the driver test have tested all firmware in the list) with the greatest satisfaction?

regards @tomino
novaks have a soft start to them and they run hotter then tekins or sp's. you would need to get a torque rotor if you want more rip. during the run the novaks will go soft and loose there punch. its not the software thats the prob its the motor. try a speed passion. they have the rip your looking for.
JdogL is offline