R/C Tech Forums - View Single Post - 200mm 1/10th Scale Bodies
View Single Post
Old 03-20-2010, 05:36 PM
  #12  
Riketsu
Tech Elite
iTrader: (34)
 
Riketsu's Avatar
 
Join Date: Aug 2004
Location: Florida
Posts: 2,604
Trader Rating: 34 (100%+)
Default

Well guys, I was able to track test the Blitz Audi RS4.

I did back and forth comparisons between the Blitz Audi RS4 and the Protoform Stratus and I really liked the Audi more. It was much more stable on power exiting corners. And it really had alot more steering all-around. Which in my track is a must since there is alot of U turns and rapid changes in directions.

Also, the body was more stable at the sweeper after the straight. All these tests were done with the wing in the middle position. I will make some testing with different wing positions.



Sorry c1, I didnt want to leave any body behind. I actually used alot of the Civic body on my Serpent 720 when I raced it. It has tons of steering but it felt like too nervous for my taste. I still have one laying around, I may be give it a one-color paint job and give it a try.

The only thing I dont like about Xceed bodies are their cost. Street cost of a Xceed body for me is usually around $30-$32. Whereas the Blitz are almost $18-$20 and Protoform is near there too.


Tomorrow I will give the R5-N a chance, and the stratus again just to be sure.
Riketsu is offline