R/C Tech Forums - View Single Post - Glitch on servos? Suggestions
View Single Post
Old 03-20-2010 | 04:34 PM
  #6  
VWVR6_T's Avatar
VWVR6_T
Tech Addict
 
Joined: Feb 2010
Posts: 560
From: Western,PA
Default

Originally Posted by Steve.
Try a Novak Stutter Stopper across the BATT terminals of the receiver. I had all sorts of problems with my ESC and brushless motor causing glitching of the steering servo and causing the receiver to failsafe. The car was also sluggish at takeoff, no torque at all. After different receivers and batteries the only fix was a stutter stopper. I made my own for $1.50 with a 1000uF capacitor and a receiver battery lead. Totally fixed all problems including sluggishness. The car took off with such wheelspin I went up 4 teeth on the pinion and it still smokes the tires. The receiver was obviously not getting enough juice at full throttle and capacitor keeps a steady voltage at the BEC.
Steve, So, this work for you? When you mention "across the batt terminals" How exactly this is connected. Also my buggy is nitro if make a difference. Thanks
VWVR6_T is offline