Because I am not part of Novak's technical support group, I suggest you email
[email protected] with your question,
Our regular CS/Tech Support hours can be located here. Before emailing, take a moment to review the instructions (trouble-shooting guide) originally included with your Novak Item:
Novak Instruction Downloads
Trouble-shooting TeamNovak's One Touch™ Speed Controls
Please make your initial email as detailed as possible. Include:
~ speed control (brand/model)
~ motor (brand/wind)
~ number/type of cells
~ battery, brand (c rating/capacity
~ rotor (old/new)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ warranty claim?
~ lipo cut-off, on/off
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc
The more information you provide in your first email, the more quickly tech support can offer you assistance.
Originally Posted by
Project D
Hi guys, I've got a bit of a problem with my Novak Slydr.
The thing is, the motor will run by itself if my transmitter is not on or sometimes during the Lipo Cut off process and the car will be uncontrollable. It was running at first when the transmitter is on but I managed to tweak around with the transmitter in order for it to stop but is there any way to go around this?