Hi irgo, - finer adjustment on RPM delay:
Have you run the new software at your track and found "setting A" kicks in too early, and stepping to "setting B" is too late? If so, try adjusting the time delay to find a happy medium. They work together, so you should be able to find that happy place.

The rpm settings may look like large differences just looking at the numbers, but on the track the range is much finer than you'd expect.

As for a custom settable function, the possibility is there if it's needed in the future. Let us know if you get stuck between two RPM settings on the track and we'll add that to the BETA feedback.