Originally posted by jwf_frani
(Front suspension)
shock tower : outside hole
shock arm hole: outside hole
shock length: long shock ends with 1 thread showing on shaft.
spring : green
shock oil : yokomo 650
piston : rayspeed 1mm x1
caster shims: 1thick 2.6mm and 1 thin 1.3mm behind the up arm
roll bar angle: 45
width:199mm, camber:1.5, toe: 1out total, ride ht: 4mm
droop :2mm of chassis travel from ride height before tire lift.
(Rear suspension)
shock length : standard shock ends w/1 thread showing.
spring : grey
shock oil : yokomo 700
piston : rayspeed 1mm x2holes
width : 200 mm, camber: 2.5,toe: 2.5, ride ht: 4mm
droop : 2-3 mm of chassis traver from ride height before tire lift.
sway bar standard.
Tire size 58mm
tire cmpnd 40shore
gearing 1st 15/49 2nd 19/45 with yokomo centax.
Thanks a lot jwf_frani
