R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 03-04-2010, 03:37 PM
  #2834  
charlie_b
Super Moderator
iTrader: (1)
 
charlie_b's Avatar
 
Join Date: Aug 2001
Location: Anaheim
Posts: 9,927
Trader Rating: 1 (100%+)
Default

Originally Posted by Rocking Donkey
Solara,

The overheat protection should work for the motor and ESC. I took this from the GT2.0 manual.


If the function is activated, the output power will be cut-off when the temperature of the
ESC or the internal temperature of the motor is up to 95C for more than 5 seconds. When the protection happens,
the Green LED will light.
 When the ESC is over-heated: The Green LED flashes as “”.
 When the motor is over-heated: The Green LED flashes as “”.
Note: The over-heat protection function for the motor may not be 100% accurate for motors other than Speed
Passion brand.

Ben
BEN,
FYI, we all had heat protection on. I blew 2 13.5's and 2 17.5's. This software testing is to ensure you guys don't blow your stuff up like us test drivers did.
charlie_b is offline