Originally Posted by
Solara
I was testing the prototype software...toasting motor is part of the plan (or expecting), so we know where is the problem.
Like other mentioned...thermal cut off is for the speedo, not the motor...and beside, I don't use it, nor the lipo voltage cut off...I (myself) don't find that necessary...
Solara,
The overheat protection should work for the motor and ESC. I took this from the GT2.0 manual.
If the function is activated, the output power will be cut-off when the temperature of the
ESC or the internal temperature of the motor is up to 95C for more than 5 seconds. When the protection happens,
the Green LED will light.
When the ESC is over-heated: The Green LED flashes as “”.
When the motor is over-heated: The Green LED flashes as “”.
Note: The over-heat protection function for the motor may not be 100% accurate for motors other than Speed
Passion brand.
Ben