Originally Posted by
kriiiss
got it to fit.........now when i go to turn the esc on it doesnt turn on.
when i press&hold the setup button the esc turns on and everything is normal
but when i let go of the setup button.......the esc turns off.
i have no idea on whats happening. I checked my soldering and there is no contact between all of the wires.
should i try setting up the esc again?
another thing is when the switch is in the on position the esc beeps so i took it out quickly bcuz i thought it was reverse polarity or the input voltage abnormal alert tone
Originally Posted by
Solara
I am very much sure all these switch/setup button pieces are very much the same...order that one, open it up, then solder just like the SP one does (left to right in order, red black white...)
Open up your broken switch and take a picture of the wires in order...then solder the same order onto the new switch...no bridging.
Solara wiring is wrong.
Kriss you are put wires the wrong way,
you might be inverted between wires,
keep in mind the red is at center,
try to invert the white and the black wires.
look again at the video
Speed Passion Switch