Originally Posted by
bfong13
Running a Tekin RS with my 1/12 with no receiver pack.
1) Do I check the box w/1s in Hotwire or leave it unchecked?
2) Do I need a voltage booster?
3) What voltage cutoff do I use?
Thanks.
Make sure you check the 1S box - this optimizes the ESC's operation with a 1S battery. You will need a voltage booster if you're not using a receiver pack, although the preferred 1S setup uses a receiver pack instead of a booster. Use a voltage cutoff of 3.07-3.14 - you'll have to scroll to the top of the cutoff slider to see the custom voltage settings, then you'll have the ability to select the voltage cutoff level. Make sure you don't leave the slider in the middle position @ 3, because that setting is intended for 3S, not 3 volts.