R/C Tech Forums - View Single Post - EB Mods JS Engine
View Single Post
Old 02-14-2010 | 09:25 PM
  #263  
single2372's Avatar
single2372
Tech Adept
iTrader: (2)
 
Joined: Jan 2010
Posts: 109
From: Modesto Cal.
Default

Originally Posted by jbright33
id stick with the 086 then. try experimenting with the carb inserts. even with the #8 in you should definitly get over 10 mins in truggy as i did 8 mins today in my buggy with over1/4 tank left with the 7.5 insert. but this was on a short track but truggy should be able to get 11-12 mins
Hay Jbright33 just wanted to thank you for the info and pointing me in the right direction. I had the JS on the track today in my Losi 2.0T with the Dynamite 086 and what a beast this thing is. No problem with getting 11-12 min run time, with the 7mm carb insert. The JS is so smooth on the low end with loads of power and screams hard on the top end.
I do own a Ninja jx21 and the two motors don’t even compare with each other. Both have around same run times but the JS has way more bottom end ready power, temped out at 190-220.
I will be ordering another JS
Ninja jx21 now for sell.
single2372 is offline