R/C Tech Forums - View Single Post - Tamiya TRF415
Thread: Tamiya TRF415
View Single Post
Old 02-14-2010, 07:02 PM
  #20798  
94eg!
Tech Fanatic
iTrader: (17)
 
94eg!'s Avatar
 
Join Date: Jan 2008
Posts: 832
Trader Rating: 17 (100%+)
Default
Originally Posted by Tha Skinny
I am having problem with my spool and my one way. It has some woble issues to it. In the manual it says to use the 3x6 screw but there is no way that it fits in the one way holes. Also I when I switched to a spool I started having issues with what seems to be belt slippage. I have checked the diff over and over and it is smooth. It makes the sam sound when I take out the front drive and put tention on it with my fingers and spin the belt. Any help would be great
The one-way requires 2.6x5mm screws as seen in the MSXX instruction manual:

http://www.tamiyausa.com/pdf/manuals/49419ml.pdf

The pulley itself is located via the center hole's tight fit on the hub of the one-way or spool. I don't know if it matters, but both the MRE spool and one-way were designed for 36T pullies. The older 35T pulley's have a different size hole in the middle and are meant for an older style 415 spool (without sleeved outdrives). I don't know about the 37T pulleys.
Last edited by 94eg!; 02-14-2010 at 08:46 PM.
94eg! is offline  
Reply