Originally Posted by
jarkko
Does the XII Link accept Associated spring in all locations, front, main shock unit and side springs? I believe Xray has not released their own shock and side springs yet.
I looked at Paul L. setup in the teamxray.forum and it seems that he used Assoc. springs all over the car.
Having tried I know CRC shock springs are too small in diameter.
the side springs fit however the xray holder is just slightly smaller so to be safe spend the 1.50 and just put the AE holder on and the side springs clip on tighter
as mentioned the main xray spring is larger than AE. I have done a whole lot of searching on the web and the springs I have found that look to be a perfect fit after measurement of the current silver spring are
HPI87277 HPI 11x28x1.1mm Shock Spring (Gold) (2)
HPI87076 HPI 11x28x0.9mm Shock Spring (2)
HPI87318 HPI Shock Spring Set (Soft) (6)
HPI87320 HPI Shock Spring Set (Hard) (6)
the dimensions on the tech sheet look spot on. and the selection is excellent. with all the above you end up with a choice of 8 springs....