srw_g

Hi, all

DUALSKY has released a new brushless speed controller: XC800TF. This is a full metal shell sensored/sensorless brushless ESC with super samll body size. Advanced passive cooling design, high power and functions.

DUALSKY XC800TF Brushless Racing Speed Controller

Specifications:
Dimensions (L x W x H): 34.5x33x18.5mm
Weight: approx 45g (without wires and capacitor)
Instantaneous Current: 800A (FET rated)
Continuous Current: 120A
Resistance: 0.0003 OHM
Input Voltage: 4.8~8.4V (2S LiPo, 4~6 cell NiMH)
B.E.C: 6V.2A
Suitable Motors: 3.5T and higher, sensored and sensorless brushless
Protection: Temp cut, Low battery voltage cut (adjustable)
Mode: Forward with brake (brush/brushless), Forward/Brake/Reverse (brushless)
Adjustment: DDRP profile (Throttle Profiles, Start Mode, Timing Advance), Auto Cell, Neutral Brake, Brake force, Reverse Force, Initial Brake, Neutral Range, Over Heat
Capacitor: Super low resistance capacitor included

Extra features:
Full metal shell
ICE Core technology – Needn’t fan when running 4.5T brushless motor (environment temp 35℃)
DDRP (DUALSKY Digital Racing Profile) - Optimized Punch, Timing and Throttle Curve for different racing environment
Dynamic Digital Timing technology – Auto timing adjust for different motor RPM
Updateable firmware
Super small size
External fan connector
One key to set function
USB link for firmware upgrade and detail parameter set

Setting Information

DDRP
Profile 1: For low grip track or buggy
Profile 2: For 3.5 ~ 6.5T brushless motor
Profile 3: For 4000KV brushless motor
Profile 4: For ≥10.5T brushless motor
Custom: Use USB link to set Throttle Profiles, Start Mode, Timing Advance in PC

Auto Cell (Low battery voltage cut)
1. None
2. LiPo
3. NiMH
4. LiFE
5. Custom: Use USB link to set voltage cut in PC

Neutral Brake
1. None: for buggy
2. 10%: For 3.5~8.5T brushless motor
3. 15%: For ≥10.5T brushless motor
4. 20%: For shaft car
5. Custom: Use USB link to set in PC, the range is 0%~100%

Brake force
1. 25%
2. 50%
3. 75%
4. 100%
5. Custom: Use USB link to set in PC, total 8 values (12.5% 25% 37.5% 50% 62.5% 75% 87.5% 100%)

Must use USB link to set below functions:
Reverse Force
Initial Brake
Neutral Range,
Over Heat