Originally Posted by
seaball
what i'm indicating is that the profiles listed, thus far, are not matching timing to rpm. they are throwing all the timing at the motor at rpm levels lower than what the motor sees at it's lowest point on the track (or real close). so, if at 5-7krpm the motor wants 40* of timing, what does it want at 10k? 20k? etc. with the last profile posted, you're running at a fixed level of 40* everywhere on the track.
my question still stands... why do you prefer to be at such extreme levels of timing so low in the powerband?
I'm with you on this. I used a Sentry Data Logger to look at what my motor was doing and was surprised to see that it was hanging out in a range that was well above what I had seen most people using for their RPM ranges with the Tekin.