Originally Posted by
DS Motorsport
@ rx7ttlm
I knew about the properties of Tungsten, that's why I ordered these small blocks and plates which could be made to size by simply glueing them together.
I might cut one of the plates in half, but I don't think that is going to be a problem with some heavy machinery.
With two low profile servo's you need a lot less weight on the LH side. Probably around 10-25 grams, depends if you are using the receiver box.
Also pay close attention to the 2413 servos, I had one on throttle and it fried within one race. Have been using the Futaba for a year on throttle and it is still perfect.
I use the Rx box, I know it weighs 28 grams. But I like having my RX protected from the elements and flying debris. I am sure the 2413 will be fine. KO servo's are very reliable. Just make sure your end points don't load the servo and your good. And with my KO TX, I get ultra high response with the 2413. If they happen to crap out I have the big daddy 2367's as back ups. My left side ballast will change depending on how much I need. I just modified those plates the other night. So I don't know what the real numbers will be. I got my T3 balanced to within 3 grams left to right on my first try lol. More mods throughout the raining season...