R/C Tech Forums - View Single Post - .21 Shimming
Thread: .21 Shimming
View Single Post
Old 02-07-2010, 01:01 AM
  #2  
Roelof
Tech Lord
 
Roelof's Avatar
 
Join Date: Aug 2007
Location: Holland
Posts: 12,332
Default
The real clearance can be messured by sqeezing a tip of solder between the head and piston turning it through TDC, that must be arround 0.6 to 0.7 mm

Less will give more bottom torque more will give a slight better RPM
Roelof is offline  
Reply