I put the rear shock tower on the front and noticed that I cannot use the outer mounting hole on the arm (using middle shock hole), I think you guys are posting a set-up basis similar to that.
I have not tried with 26mm tires but I think the wheel binds more than 2mm with 28mm's. This is with the nitro rack also with one .06 washer per ball to get a little closer to the elect. racks' ackerman.
Had to move to the inner shock hole on the arm, which stands the shocks up pretty straight. I may move the shock to the inner rear mount since the shocs are so upright.
I'll see how the rear tower on front goes this weekend.
Peace
Thanks all for the quick replies