Originally Posted by
SlideMasteR
we ran yesterday at k90 with the new software and it is really good, had to drop 4 teeth on the pinion and the motor temp was at 79 deg c after about 6 min running, lets see what happens at the nats now?
another quick question, can the firmware be changed on a GT1.1 ??
i suggest dropping another tooth or 2 and see if you can keep the same lap times with a cooler motor. What timing where you running ? default 22.5 ? if yes you can pick up the timing to get a bit more rpm or drop to 18 to keep the punch..
firmware cant be updated on the 1.1 unfortunately.