Originally Posted by
B4james
Without going all the way through the thread again, does anyone have a starting point for 10.5 on medium to large track with 203 software.
Here's what I had for an indoor 30m*16m fast flowing track;
Profile 4
40 timing
10 turbo
Rev's circa 1500 - 10000
Delay 0.7
Ramp 2.0
It was the first time I had used the software, I would now change to RPM's to say 3000-12000 and maybe add a bit more timing, remember to test with turbo set to 0 and check gearing temps. My Vector X12 was coming off at 52degC (circa 120degF).
I was also 0.7 lower on my FDR compared with before.
SKiddins