R/C Tech Forums - View Single Post - Jammin' X2 Buggy
View Single Post
Old 01-15-2010, 04:13 PM
  #417  
DR ZAIRUS
Tech Adept
 
DR ZAIRUS's Avatar
 
Join Date: Oct 2007
Location: Valencia (Spain)
Posts: 201
Default

Originally Posted by wired
just hit the track with the x2 this weekend. would have to say that is alittle better then the x1cr, but i am having problems under accelration with the car getting really lose. Setup is 5,5,2 Stock springs, 400 in front and 200 in rear. 3.0 rear block Camber -2 all the way around new rb mods go tech 7 port with the stock clutch stuff in the box. Changed rear chassis brace from alloy to plastic. This help some, however not enough. Car jumps really good and handles rough area good. Just to lose or really twitchy out of the hole. Any help would be nice. Like alot of you guys have said its hard to find jammins on the east coast so exchanging setups is out of the question.
I fought this same problem for months. Tried everything (diffs,rear toe, antisquat, shocks....). What finally worked for me is going back to a setup similar to the one you describe, but with neutral toe in the front. It was magic!! All of a sudden the rear became hooked!!!

Last edited by DR ZAIRUS; 01-15-2010 at 05:03 PM.
DR ZAIRUS is offline