Hey guys, new to the site. Well i went out and bought a new charger and 3 new lipo batteries. Venom Pro Charger Plus along with Venom 5400mah 3s1p 20c, Venom 6400mah 3s2p 20c, and Venom 8000mah 2s2p 25c. Heres my problem, while the 3 cell batteries are charging or balancing the 3rd cell is not recognized by the display screen. The charger recognizes that the batteries are 3 cells before each charge or balance but its not showing any voltage at all for that 3rd cell on both batteries. I used a volt meter on both of the 3 cell batteries and came up with 11.6v total, cell one=1.9, cell two=1.6, and cell three=1.5. Both batteries matched up identicle even tho one is 5400mah and one is 6400mah. So im thinking there just might be something up with that number 3 voltmeter on the charger its self. What do yall think it could be.