Originally Posted by
JR007
Good stuff, thanks for that. I think i'll give her a ground-up rebuild tonight and make some notes about where it is now, then start mucking about with some of your suggestions. One at a time of course
If you are interested ... I have used with good results in category 17.5 foam asphalt fol setup:
Front
Spring Xray 30lb Light purple
Oil 50wt
Piston 2 Hole 1.2mm
Sway Bar 1.6mm
Camber link shim 2mm
1mm below the pivot suspension
0 ° pivot toe
Rear
Spring 17.5lb Xray white
Oil 30wt
Piston 2 Hole 1.2mm
No sway bar
0mm Camber link
1mm below the pivot suspension
3 ° pivot toe
Tire
Front and rear 37shore
Important!
Min.57mm tire diameter, maximum 60 mm