Originally Posted by
reggie l.
this is what you do , if you have not moded the rear links to be shorter then you would need to run the links on the inside lower hole on the shock tower and the outer most hole on the hub
if you have did the mod like my self, you will need to run it on the lower out side hole on the tower and the 2nd outer hole on the hub..
then adjust your camber to how you want...
I allready modded it and installed like I described. And of course located the shocks on the new outer hole at the top of the tower. So I'll just try it and see. I guess I should have did one side first and assembled it and watched the difference throughout the suspension travel to see the effects it made to the camber while in motion.
What are we trying to acheive with this mod? do you want the camber to stay at say 2 deg throughout the travel or do you want more neg camber as the suspension compresses to plant the tire better?