R/C Tech Forums - View Single Post - Tamiya mini cooper
View Single Post
Old 01-08-2010 | 10:30 PM
  #11218  
niznai's Avatar
niznai
Tech Elite
 
Joined: Feb 2009
Posts: 2,972
From: All over the place
Default

Originally Posted by Andrew_Carter
Thanks for the advice about the toe in guys,i ran the car for tonight for the first time but it wasn't to great but its got plenty of potential.What kind of oil/spring set ups are you lot running? Were running on low-medium traction carpet with lipo/tamiya black can motors.

Wow. You're gonna have some issues there. Drop the ride height as much as you can. Use a low profile servo and add lead under it mercilessly. Add lead under the battery if it has dimpled bottom. Use a very soft oil (I use 10wt) with three hole pistons (TRF mini shocks). The idea is to let it roll gently into the corners rather than breakaway suddenly and traction roll. A little bit of camber is what I would use too if the problem still appears. Use liftoff oversteer to hook it around corners in the tight infield (if it is the case at your track). Start with M-grips on the front and S-grips on the rear. Have another pair of M-grips handy for the rear in case you need them.


One of the first lessons I learned when started racing many years ago was: "Old age and treachery overcome youth and exuberance every time".
We should have a thread with pearls of old (or middle aged) folks' wisdom. I think there's plenty of us but don't expect me to be a hardcore contributor. Wisdom is not my forte.

Last edited by niznai; 01-08-2010 at 10:49 PM.
niznai is offline