Originally Posted by
goots
Hi guys Im new to the cyclone and am looking at several setups. Im confused about the roll center and squat settings. Im trying out Barry Bakers setup and it says use 1.5 mm shims under the suspension toe-blocks. Does that mean I keep the stock 2mm shims under the pivot blocks also? Or is it 1.5mm all around.
He used 1.5mm under all the blocks. Sometimes we will designate the blocks as FF, FR, RF, and RR. FF being the front toe block, FR being the "pivot block". RF being the Rear pivot block, and RR the rear toe block.
Hope that makes sense.
-Korey