Starteur,
Tamiya have not released a set and will most probably not. The adjustable arms everyione was referring to at the time was the rear set that has been released. People thought these were for the front.
If you want adjustable arms for the front then you will need to make them yourself or get them from 3Racing as a turnbuckle set.
The other option is to get fixed length arms in two lengths available for the front and rear made by Tobee Craft or Tech Racing.
I have not had problems using the standard front camber links on my MO5, fitted in the upper hole. If I place in the lower hole it wears the inside of the tyre out quickly.
I hope that answers your question.
Regards,
Calvin.
Last edited by caltek1; 01-03-2010 at 04:28 PM.