R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 01-16-2004 | 10:29 PM
  #6129  
AdrianM's Avatar
AdrianM
Tech Champion
iTrader: (4)
 
Joined: Aug 2001
Posts: 6,101
From: Saint Petersburg, FL
Default
Does AE make 2 lengths of Front Springs?

I just finished building my Reflex 12 and all of the Trinity team drivers are using AE .020 front springs. I have a pile of those so I put them on. To achieve 0 preload I had to take out all but one shim above the top ball. Now the bottom of the king pin touches the inside of the rim. A shorter spring and putting the shims back would fix this.

Any Suggestions?
AdrianM is offline  
Reply