Originally posted by Adam Hartzell
Bodido--The pivot balls should move freely with little or no force. As far as the damper tubes go ditch the springs. I run a Quad 12 but all the RugRats I have seen don't use the springs.
I disagree with Adam on this one. Sorry, but I have run the Rugrat with the spings on the dampners to handle the tweak of the chassis and provide return to chassis neutral after a turn. It works! This could be a valuable tuning option for you when the track surfaces are on the extreme side. Some have tried tweaking with both the t-plate screws and the springs with success. Good racing to you.