so finished my wiring so far, will post pix when 100% done, ran 13g tq wire to 1c lipo and 16g tq wire to my 13.5 motor, i heARD, MOST LIKELY A RUMOR...ooops sorry 4 caps, but if one of the motor wires were to run a 13 gauge to the 13.5 ,and the other 2 the 16 gauge,wich terminal would be chosen, running 16g tq wire to the other two...if answered properlly i heard correctlly,if not was bummed steeered...car looks pretty good, just waiting on the crimping tool i ordered to shorten the servo lead wires/esc wire/transponder wire..will post when done, this should be my cleanest 1/12 ever...stoked!!!!lovin 1/12 this is my break from 1/8 onroad, and more or less semi new with 1/12 so its a learning curve for me...