R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 12-15-2009 | 05:39 AM
  #32907  
jdeadman
Tech Master
iTrader: (41)
 
Joined: Oct 2008
Posts: 1,325
From: Grand Portage, MN
Default

I would also look at your front and side springs. I had something like that when I had too much preload on one side spring. I like to setup my car where I do not need more than 1/4 turn in from just touching to get the car tweaked. if it's more than that you may have a problem.

Also check to see if the front ride height is the same on the left and right.
jdeadman is offline