Hi,
a friend of mine has a problem with his new RS: sometimes after standing still on the starting line for 30+ sec the motor won't run and he'll miss the start. It's strange because he ran a few warmup laps before that and it was OK, but after taking starting position you have to unload the rear tires to make the motor run, after that the whole run is OK.
Using 2S Lipo in World GT with newest software updated, Tekin Redline 17.5T motor, temp is fine, usually under 60°C.
Has anybody seen something simillar?
Yup,
1. motor overheated at one point, try different motor
2. sensor cable is bad, try a different sensor cable
3. reflash the Tekin (highly doubt this is the problem)