R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 12-11-2009 | 02:31 PM
  #32881  
avs's Avatar
avs
Tech Master
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,175
Default
Originally Posted by PDX-Spike
1/12th fronts are about 1 3/8ths" or 34.9mm. WGT tires are 1 13/16th" or 46mm. These measurments are the inside of the wheel, where it is easiest to be measured by a caliper.

So assume the 60mm rims with 1 mm difference front to rear is 1 degree. Then, by extrapolation, we use the difference between 34.9mm (for 1/12th) and 60 mm which would result in a little more than 0.5 mm difference front to rear to achieve a 1 degree of toe (in or out). Right?
yes pretty much. it might be easier to state it like:
the difference front to rear for 1 degree is the diameter/57.3

so for 1/12 its just 35mm/57.3 or 0.6mm and for wgt 46/57.3 or 0.8mm
avs is offline  
Reply