R/C Tech Forums - View Single Post - CRC / Advanced Electronics Black Diamond Speedo - Ban due to cost??
Old 11-30-2009, 10:54 AM
  #28  
Slotmachine
Tech Champion
iTrader: (4)
 
Slotmachine's Avatar
 
Join Date: May 2003
Location: Germantown Maryland
Posts: 5,823
Trader Rating: 4 (100%+)
Default

Originally Posted by PitNamedGordie
From another thread...





Edit:

This was banned due to performance not cost...
Here are the rules you speak of , I dont see a speedo rule here......

Body provided deck lid spoilers allowed (not wings). No additional skirts or raised/extended wings or air control surfaces allowed. Body must be trimmed at body trim lines. Full rear bumper required. It is highly preferred that bodies are detailed in race type livery in period-correct paint schemes. Fluorescent colors, wild graphics, chromes and non-period correct paint schemes are frowned upon. All cars must have a number on the hood, both doors and trunklid. Wheel covers of any type are NOT allowed.
All cars must include a driver figure consisting of at least a head and shoulders.

Tire & Wheel Specifications:
The only tires allowed are HPI tire part #4793 front and #4797 rear, using stock tire inserts provided with tire and any HPI Vintage wheels designed to fit these tires. All other tires and/or part numbers are illegal. Five or Eight spoke wheels available in various colors. 0mm offset front wheels and 6mm offset rear wheels are intended for 26mm width fronts and 31mm width rear tires. 8-spoke Vintage wheels from #3805 through #3814, 5-spoke Vintage wheels from #3815 through #3822 and Vintage stock car wheels from #3854 through #3860, Vintage Wheel CC Type #33472 and #33473, Vintage Wheel DTP Type #33474 and #33475 are all legal wheels.
Grinding of tire tread is NOT permitted. Sanding of mold seam to remove seam is allowed. HPI Vintage Slicks and HPI Vintage Performance Tires are not allowed. Tire traction compounds are at the discretion of the track. No other altering, changing or softening of the tire is allowed. No "double stuffing" of foam inserts allowed—only single stock vintage tire inserts are allowed.

Chassis Specification:
Four Wheel Drive touring car chassis only. Any era or brand 4wd chassis is allowed. An Excel spreadsheet gear ratio and final drive ratio calculator for most touring car chassis is available here.

Motor Specifications:
Option 1: 27-turn ROAR stock motor: No FDR limit, bearings are not allowed.
Option 2: 17.5 brushless: Motor timing advance is allowed. 12.5 mm rotor diameter maximum (no "tuning" rotors are allowed).
Option 3: 21.5 brushless with 2C LiPo: Novak SS21.5 Pro brushless motor (pn:3421)or Ballistic 21.5 (pn:3621) ONLY combined with any ROAR-approved hard-cased 2C 7.4v LiPo pack up to and including 5000 mAh capacity. Novak motor is the ONLY motor allowed at this time. All house track rules regarding LiPo usage apply. Final drive ratio is to not exceed 4.2. Motor timing advance is allowed. 12.5 mm rotor diameter maximum (no "tuning" rotors are allowed).
Suggested gearing FDR recommendations:
  • 27t brushed/4-cell: 5.4 - 5.7 FDR
  • 17.5 brushless/4-cell: 3.5 - 3.7 FDR
  • 21.5 brushless/LiPo: 4.2 - 4.6 FDR
Tracks should not dictate which motor combination a racer should choose. All three motor/battery combos have been tested to compete evenly against one another in competition with great success. If any one power choice shows a definitive advantage at a certain track, it is up to the race management to even the racing out via suggested gearing changes.

Non-Binding Informational Suggestion: Current testing shows that speed controls set to 10 degrees timing advance, with no additional "Boost" or "Turbo" functions, or profile #1 on LRP speed controls are very close in speed. This is a suggestion for those tracks having a disparity between cars equipped with high timing ESCs and those without. *THIS IS NOT A CURRENT RULE*

Battery Specifications:
4 cell NiCd or NiMh batteries, 4600 mAh limit
2 cell ROAR-approved LiPo hard cased, 5000 mAh limit (21.5 brushless motor option ONLY)

Ride Height Specification:
Minimum ride height is 5mm.

Weight Specification:
Minimum 1450g in race-ready trim

Race Specification:
- 5 minute qualifiers
- 8 minute mains
- Absolutely NO IFMAR-type starts. All heats and mains should be straight-up starts, with random sorts for each heat. Non random sorts should shuffle starting order for each heat.

Optional Main Variations:
- 12-20 car A-mains, depending on car counts.
- Invert qualifying order based on random hat pull (top 6-10 cars).
- "LeMans" type starts where all cars are lined up on an angle to the racing line in order.
- Run track in reverse rotation for mains.
- Rolling starts



MOST IMPORTANTLY: If it's not in the rules, and does not encompass the spirit of slower, controlled racing with realistic looking cars, consider it illegal. This is called the "Spirit of VTA" Rule. The class is based on slower, equal playing field competition with less traction, minimal aerodynamic aids and mostly older carpet racing technology. The final objective is close, fair, wheel-to-wheel racing for all. All decisions of the race promoter or track owner are final.
Slotmachine is offline